Additional Services for Pool Cage in Florida
New Model Rescreening and Painting is a company capable of flying with the client’s imagination and making dreams and wishes come true. That’s why we perform additional services for pool cage in Florida such as:
Pressure Wash
This is a service that we will always offer in the pool cage area because it’s our specialty, and in general we do it when we replace the entire screen. Another occasions, we offer this service for the floor surrounding the pool, as well as on porches and lanais when they’re going to be repaired and painted.
It is important to argue that we use different tips depending on the area we are cleaning, and the pressure water equipment has enough power (4400 PSI) to remove all dirt from the surface. We usually apply the turbo tip for Pool Cage in Florida; this tip is of greater power to remove loose paint, corrosion, and dirt from metals. We use less powerful tips for other surfaces; this way, we do not damage with water pressure the area we are going to clean, but we use the right products to remove dirt more easily.
Kick Plate Installation
Partial metal installation is usually done in restorations. When we cover the metals below with 1×2 angle metal by replacing the cage anchors, this facility will offer a better finish of the work and look like new.
Metals are also added to install new screen panels, install new door, kick plate, and more. Aluminum is also added anywhere else that is necessary to provide strength and safety to the aluminum structure.
In other cases we only adjust the metals to the structure after losing rusty screws.
Gutter Replacement Or Repair
Gutter replacement is a highly sought after service for several reasons, usually required when changing the house’s roof to a higher one. It is necessary to increase the gutter’s size to fulfill its function correctly.
It is also requested when the cage was installed with a regular gutter that was not designed to support the weight of the aluminum structure, in this case it is replaced by a super gutter that can be 5 or 7 inches wide.
In addition we provide the service of repair of gutters, this service is included in the restorations when the gutter has dripping, we simply remove the old sealant applied to the joints, clean the area and apply new permanent sealant.
Rusty And Loose Screws Replacement
This service is included within the restorations of pool cages, in this case we will replace every single screws with stainless steel. These will never rust and the warranty will be forever.
Our company also replaced every single screws with the rescreening if the client requires it.
It’s often not necessary to change all the screws. We also offer this service in part because sometimes screws get damaged, affecting the structure. We always look for a replacement screw that will fit properly, usually being a size bigger than the previous one to guarantee the security of the aluminum structure.
Hinges, Doors And Door Frames
We make these reparations complete or in part, according to the client’s needs. Some times the door closures have been substituted on multiple occasions and the installers changed the position of the components of the closure looking for the best place for the screws, leaving the previous holes exposed and looking ugly. The hinges oxidize and break. The doors’ kick plates dent and come loose.
These are just some of the problems that tend to occur. Not only do these issues cause the door to not work properly, but they also affect the comfort of the client and the appearance of the home.
Cable Adjustments And Changes
Security cables tend to come loose with gusts of wind, which causes the screen panels to come off and wrinkle. The screen need to remain taut for the pool cage reserve its appearance. Other times, the cables break, and the cage is left entirely vulnerable to strong winds, which is a much more dangerous scenario. In both cases, it’s necessary to take measures as soon as possible by either replacing or adjusting them to ensure the pool enclosure’s safety
Pool Cage Deck Painting
We offer this service typically when we provide pool cage, front entrance, or back porch painting. First, we start by pressure washing the area to remove mold and grime, then we repair any cracks and then apply two coats of paint with primer to leave the floor looking shiny and new.
Installation Metal
Partial metal installation is usually done in restorations. When we cover the metals below with 1×2 angle metal by replacing the cage anchors, this facility will offer a better finish of the work and look like new.
Metals are also added to install new screen panels, install new doors, kick plate, and more. Aluminum is also added anywhere else that is necessary to provide strength and safety to the aluminum structure.
In other cases we only adjust the metals to the structure after losing rusty screws.
Doggy Door Installation
The installation of pet doors is really simple, in this case the customer chooses the right size for their pet, which can be, small, medium or large, the customer will also choose the place where they want to locate the door and we proceed to create the aluminum frame for the installation.
